Bath Panel Installation thoughts

Thoughts on preparation for bathroom remodeling.

Tiling is made right after the pipe installation, the installation of the bath tub and the door. If the bath panel is finished with tiles, this bath panel may provide a route for the bath water to drain. But it is more preferred to a removable panel to make magnetic fasteners (rather strong and not less than four pieces of them).

If plumbing is in the room already, it should be covered with respect to sheets, cardboard, etc. The bath is usually covered with plywood (12-18 mm) or a wallpaper board structure, to protect against accidental fall of rubbish. If the floor has been tiled, it is necessary to cover it, too. It is better to use a wet cloth with you for cleaning dirty hands or tiles.

Seam size (between the tiles) depends on the tile quality (edge roughness) and aesthetic needs. Seams are usually 1.6 to 3 mm wide for large format ceramic tiles. Using tiles incorporating pegs helps you to maintain distance, even between the tiles. Do not tile the whole wall in one day, as it should have time to develop a strong position on the wall.

If you are planning several additional decorative details such as the use of borders or entering the tile patterns, it is important to define the place on the wall for these. For the finishing of the outer and inner corners special plastic beads can be applied. They make corners look more attractive. Flexible bars ensure a perfect match with wall and floor tiles. When buying plastic corner bars, one should select it so that the groove size would exceed the tile thickness.

Installation of new walls can be a challenge whether they be brick, moisture-resistant gypsum plaster, concrete or foam. Control of ventilation is important. Wire bonding, water and sewage pipes layout should be thought of. Replacing the towel rail is also a thought. Set individual valves on hot water, the flush tank and a washing machine. Installation of false ceiling with built-in fixture. Waterproof coating. Plastering. Wall tiling. Installation of the bath. Installation of bathroom equipment. Tiled floor. That is all. At this point in the bathroom renovation is finished.

For a small bathroom, it is possible to opt for the specially developed programs, mini sanitary items used when there is less space. There is a special doll effect where everything seems larger compared with the reduced objects in these bathrooms.

Tiles should be strictly vertical hardened, all blocks must be located at the same level. Suspended or sinking of one block relative to another edge is visually unbearable. There should be no voids under the tile blocks. Space between the tiles should be the same everywhere. The tile joints should fit together and form a straight line (strictly on the level). Tile patterns must be aligned. Space between the tiles should be properly encapsulated.